S & T Engineers

Standard Features
	Chemical Composition
	65/35 brass equivalent to Alloy No.JIS-H3260 C2700
	No Acid-Corrosion And No Damage To resins
	The Special treatment makes the wiresurface smooth, free from dirt, rust and grease that causes inefficiency toelectric discharge.
	Standard Weight Control : By perfect control in process, we obtain the standard weight per coil that enables us to maintain the stability of processing time and the accuracy of drawing
	No Weldment : The rough surface caused by welding could effect the quality and accuracy of performance. The welded wire tends to break that wastes the time to re-thread
	Height-Dimensional Precision: Wire diameter tolerance and roundness tolerance are both limited to 1/*m
	Outstanding Straightness:Outstanding straightness ensures automatic threading successfully

Specification

Order No	Wire Type	Diameter		Diameter Tolerance (mm)	Breaking Load (kg)	Tensile Strength (N/mm²)	Elongation (%)	Suitful Working Style	Code No
		inch	mm
VEW-10H	Hard	0.004	0.10	±0.001	0.78	980<=	0.4<=	Straight Cutting a.Pass Cutting b.Rough Cutting c.Finish Cutting	2009-001
VEW-15H		0.006	0.15		1.73				2009-002
VEW-20H		0.008	0.20		3.14				2009-003
VEW-25H		0.010	0.25		4.92				2009-004
VEW-30H		0.012	0.30		7.07				2009-005
VEW-33H		0.013	0.33		8.55				2009-006
VEW-20S	Soft	0.008	0.20	±0.001	1.41	441<=	15<=	Angle Cutting	2009-010
VEW-25S		0.010	0.25		2.21				2009-011
VEW-30S		0.012	0.30		3.18				2009-012
The packing used a standard coil. Here show 3 kind of coil packing of type for choice. The popular is p-5R(5kgs). Other coil type ,weight will be available.